Understanding the critical stabilisers of the posterolateral knee for accurate diagnosis, surgical planning, and reconstruction

The posterolateral corner (PLC) of the knee is a complex anatomical and biomechanical unit responsible for maintaining stability against varus forces and posterolateral rotation. Historically described as the “dark side of the knee,” the PLC presents a diagnostic and surgical challenge because of its intricate anatomy, overlapping stabilising functions, and frequent association with cruciate ligament injuries.

PLC injuries rarely occur in isolation. Only approximately 28% of PLC injuries are reported to occur in isolation, with the majority associated with anterior cruciate ligament (ACL) or posterior cruciate ligament (PCL) tears. Failure to recognise an associated PLC injury can contribute to persistent instability and compromise the outcome of cruciate ligament reconstruction.

A detailed understanding of PLC anatomy is therefore essential for managing complex knee ligament injuries.

  1. The Major Static Stabilizers of the PLC

The three principal static stabilisers of the posterolateral corner are:

  1. Fibular collateral ligament (FCL), also known as the lateral collateral ligament.
  2. Popliteus tendon (PLT).
  3. Popliteofibular ligament (PFL).

These structures work together to resist varus stress and excessive posterolateral rotation. Their individual contributions differ, making anatomical identification important when assessing injury patterns and planning reconstruction.

  1. Fibular Collateral Ligament: The Primary Varus Stabilizer

The FCL is the most lateral structure of the PLC and serves as the primary restraint to varus stress at the knee.

Anatomical attachments

The femoral attachment lies approximately 1.4 mm proximal and 3.1 mm posterior to the lateral femoral epicondyle. Its distal attachment is located on the fibular head, approximately 8.2 mm posterior to the anterior margin of the fibular head and 28.4 mm distal to the tip of the fibular styloid. The insertion occupies approximately 38% of the width of the fibular head.

The average distance between the femoral attachments of the FCL and popliteus tendon is approximately 18.5 mm. The FCL has an average total length of 69.6 mm between its attachment sites.

Clinical significance

Because the FCL is the primary varus stabiliser, its disruption can produce abnormal lateral joint opening during varus stress testing. Accurate identification of its femoral and fibular attachments is particularly important during anatomical reconstruction.

The distal FCL attachment is closely related to the biceps femoris tendon, making familiarity with the surrounding anatomy essential for safe surgical exposure.

  1. Popliteus Tendon: A Key Rotational Stabilizer

The popliteus tendon is a major component of the posterolateral stabilising complex. It provides restraint against excessive external rotation of the knee and contributes secondary resistance to varus stress.

Anatomical course

The femoral attachment lies within the proximal half and most anterior fifth of the popliteal sulcus, approximately 18.5 mm anterior to the femoral attachment of the FCL.

From its femoral origin, the tendon courses posterodistally and obliquely toward the posteromedial tibia through the popliteus musculotendinous unit. It becomes tendinous in the lateral third of the popliteal fossa and follows an intra-articular course around the posterior aspect of the lateral femoral condyle, medial to the FCL.

The average total length reported in the presentation is approximately 54.5 mm.

Dynamic relationship with knee flexion

An important anatomical observation is that the popliteus tendon lies anteriorly subluxated relative to the popliteal sulcus when the knee is near full extension. It does not completely enter the confines of the sulcus until approximately 112° of knee flexion, with a reported range of 105°–130°.

This relationship highlights the dynamic nature of the posterolateral anatomy and the importance of understanding tendon position when interpreting anatomical and biomechanical studies.

Clinical significance

Injury to the popliteus tendon can compromise rotational stability, particularly when associated with disruption of the FCL and PFL. Its contribution to the overall stability of the knee should therefore be considered when evaluating suspected PLC injuries.

  1. Popliteofibular Ligament: An Important Rotational Restraint

The PFL connects the popliteus musculotendinous junction to the fibular head and is an important component of the deep posterolateral stabilising complex.

Anatomical attachments

The PFL originates at the musculotendinous junction of the popliteus and divides into two components: an anterior division and a larger posterior division.

  • Anterior division: Attaches to the anterior downslope of the medial aspect of the fibular styloid, approximately 2.8 mm distal to its tip.
  • Posterior division: Attaches to the tip and posteromedial aspect of the fibular styloid, approximately 1.6 mm distal to its tip.

Biomechanical role

The PFL contributes secondary restraint to varus stress and internal rotation. Together with the FCL and popliteus tendon, it helps control abnormal movement between the tibia and femur.

Its disruption may be particularly consequential in a knee already deficient in one or both cruciate ligaments, where the secondary stabilising role of the PLC becomes increasingly important.

  1. Secondary Stabilizers of the Posterolateral Corner

Although the FCL, popliteus tendon, and PFL are the principal static stabilisers, several additional structures contribute to posterolateral knee stability.

Lateral capsular complex

Deep to superficial, the secondary stabilisers include the lateral capsular thickening of the mid-third lateral capsular ligament, incorporating the meniscofemoral and meniscotibial components.

The coronary ligament, which attaches the posterior aspect of the lateral meniscus to the tibia, also contributes to the posterolateral capsular complex.

Lateral gastrocnemius tendon and fabellofibular ligament

The lateral gastrocnemius tendon originates approximately 14 mm posterior to the femoral FCL attachment. It courses distally to join the medial gastrocnemius and soleus in forming the triceps surae.

Less frequently injured, the lateral gastrocnemius tendon can serve as an important anatomical landmark during surgical reconstruction.

The fabellofibular ligament extends vertically from the fabella to the fibular styloid. The fabella is a sesamoid bone within the proximal lateral gastrocnemius tendon, reported in approximately 30% of individuals.

Biceps femoris tendon

The long head of the biceps femoris divides approximately 1 cm proximal to the fibular head into direct and anterior arms.

  • The direct arm inserts on the posterolateral aspect of the fibular head.
  • The anterior arm inserts more distally and anteriorly.
  • Both arms enclose the distal attachment of the FCL.

The anterior arm is an important surgical landmark when accessing the distal FCL attachment during reconstruction.

The common peroneal nerve (CPN) lies deep to the biceps femoris tendon proximally and emerges posteriorly approximately 1–2 cm proximal to the fibular head. Its proximity to the operative field makes careful identification and protection essential.

The short head of the biceps femoris tendon also divides into two segments, attaching along the lateral aspect of the fibular styloid, medial to the direct attachment of the long head.

Iliotibial band

The iliotibial band forms the most superficial layer on the lateral aspect of the knee. It attaches to Gerdy’s tubercle and has peripheral attachments to the patella, lateral intermuscular septum, and capsule.

Although it is not one of the three principal static PLC stabilisers, its relationship to the lateral knee anatomy is important during surgical exposure and reconstruction.

  1. Arcuate Fracture: A Clue to PLC Injury

An avulsion fracture involving the fibular styloid is termed an arcuate fracture. It may indicate injury to the posterolateral ligamentous attachments and should prompt careful assessment of the PLC.

Recognition of this fracture pattern is clinically important because associated ligament injuries may be more extensive than the initial radiographs suggest.

  1. Biomechanics: Why the PLC Matters

The posterolateral corner provides primary restraint to varus forces and excessive posterolateral rotation of the tibia relative to the femur.

The three principal structures have complementary functions:

  • FCL: Primary restraint to varus stress.
  • Popliteus tendon: Important restraint to external rotation, with a secondary role in resisting varus stress.
  • PFL: Secondary restraint to varus and internal rotation.

The PLC also acts as an important secondary stabilising system in cruciate-deficient knees, helping resist abnormal anterior and posterior tibial translation.

This explains why an unrecognised PLC injury can complicate the management of ACL or PCL tears. If the secondary stabilisers remain deficient, reconstructed cruciate ligaments may continue to experience abnormal loading.

The biomechanical importance of the PLC therefore extends beyond isolated posterolateral instability: it influences the overall stability of the knee and the demands placed on associated ligament reconstructions.